8/16 Channel Amplifier
   

Description

The D8250 and D8120 are professional eight channels power amplifiers capable of delivering a power of 500 Watt and 120 Watt at 4 Ohm loads connect to its 8 output channels. On the 16 channels D1660 amplifier, it can deliver a power of 60W at 4 Ohm loads. The perfect solution for installed Multi-Zone audio distribution systems with 8 to 16 zones with great simplicity in use and installation.

All done in double rack space, steel 19”rack mount housing. Inputs and outputs are all performed with 3-pin Euro-Terminal block connectors, allowing balanced input signals. Each individual channel is fitted with a separate gain control potentiometer that sets Stereo/Bridge & Parallel via a switch to avoid cable clutter when distributing the input signal.

Built-in multipurpose protection circuit protecting against DC malfunction, short circuit, overheating, overload, and limits the signal when necessary.

Specification

D8500 D8120 D1660
Channel number 8 analog input, 8 speaker output 16 analog input, 16 speaker output
Input Port Phoenix
Output Port Phoenix
Output Port SpeakON * 4
Output power(1% THD+N, 1kHz @ 4Ω) 500Wx8 120Wx8 60Wx16
Output power(1% THD+N, 1kHz @ 8Ω 250Wx8 60Wx8 30Wx16
Output power(1% THD+N, 1kHz @ 8Ω 89% 88%
Peak Output Current 30A 9.2A
THD+N (1kHz @ 1W) 0.003% 0.1%
Dynamic range 120dB(A) 110dB(A)
Idle Noise 40μV(A) 100μV(A)
Output impedance (1kHz) 14 mΩ 200 mΩ
Main input voltage 90VAC – 240VAC
Power Supply PowerCON*1 IEC
Standby consumption 0.6W / /
Dimension 483x175x88mm 483x325x88mm 483x325x88mm
Weight 7.1kg 8.5kg 8.6kg